Does anyone have any experience with this combination? Times, agitation, etc...
If anyone can give me an idea of what to expect with this combination.
Thanx
Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Moderator: Keith Tapscott.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Whatever times you come up with, cut them by 30% or increase dilution by 50%. Most development times you will find around are excessive.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
The problem is that i don't have any time to begin with. I couldn't find any recommendations for this combination.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
They are on the Tetenal site. But I urge you to cut them back substantially:Phototox wrote:The problem is that i don't have any time to begin with. I couldn't find any recommendations for this combination.
http://www.tetenal.com/index_c.htm?AKT= ... 00000&L=UK
Try 1+9 for 5 minutes to start.
But in any event I would not bother with Pan-F. Fujifilm Acros is about a stop faster and just as fine-grained.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
It's not Pan-F, it is Pan 400 http://www.photopoint.ee/images/product ... -21825.//jpg// , and there is nothing about it on Ilford or Tetenal website.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Phototox wrote:It's not Pan-F, it is Pan 400 http://www.photopoint.ee/images/product ... 25.////jpg//// , and there is nothing about it on Ilford or Tetenal website.
Then start with times for HP5 and go from there. This is elementary. Trial and error.