Kentmere 100
| Film | Developer | Dilution | ASA/ISO | 35mm | 120 | Sheet | Temp | Notes |
|---|---|---|---|---|---|---|---|---|
| Kentmere 100 | 510-Pyro | 1+100 | 100 | 15 | 15 | 20C | [35d] | |
| Kentmere 100 | 510-Pyro | 1+100 | 100 | 11.75 | 11.75 | 20C | ||
| Kentmere 100 | 510-Pyro | 1+500* | 100 | 60 | 20C | |||
| * User Notes * Semi-stand development Continuous inversions for first 45 secondsFollowed by one inversion every 10 minutes. | ||||||||
| Kentmere 100 | 510-Pyro | 1+100 | 200 | 15 | 15 | 21C | [29a] | |
| Kentmere 100 | Acurol-N | 1+70 | 64 | 10 | 10 | 20C | [a04] | |
| Kentmere 100 | Adox HR-DEV | 1+35 | 160 | 10 | 10 | 20C | [a04] | |
| Kentmere 100 | ADX II | 1+24 | 100 | 6 | 6 | 20C | ||
| Kentmere 100 | Arista® Premium | 1+9 | 100 | 10 | 10 | 20C | ||
| Kentmere 100 | Ars-Imago FD | 1+39 | 50 | 5.25 | 5.25 | 20C | ||
| Kentmere 100 | Ars-Imago FD | 1+39 | 100 | 7.5 | 7.5 | 20C | ||
| Kentmere 100 | Ars-Imago FE | 1+1 | 50 | 6.5 | 6.5 | 20C | ||
| Kentmere 100 | Ars-Imago FE | 1+1 | 100 | 8 | 8 | 20C | ||
| Kentmere 100 | Atomal 49 | 1+1 | 100 | 15 | 20C | |||
| Kentmere 100 | Bellini Hydrofen | 1+15 | 100 | 4 | 4 | 20C | ||
| Kentmere 100 | Bellini Hydrofen | 1+31 | 100 | 7.75 | 7.75 | 20C | ||
| Kentmere 100 | Black/White & Green | 1+49 | 100 | 13.5 | 13.5 | 20C | ||
| Kentmere 100 | Caffenol C | stock | 100 | 10 | 10 | 18C | ||
| Kentmere 100 | Caffenol Delta STD | stock | 100 | 12 | 20C | |||
| * User Notes * 5 minute pre-soak. Standard inversions for first minute. 8 inversions in 10 seconds at every minute mark until time is up. | ||||||||
| Kentmere 100 | Cawanol | stock | 100 | 16.5 | 16.5 | 20C | ||
| Kentmere 100 | Cinestill Df96 Monobath | N/A | 80-100 | 6 | 21C | |||
| * User Notes * Native ISO development: 80°F (27°C) for at least 3 min. Constant agitation 75°F (24°C) for at least 4 min. Intermittent agitation 70°F (21°C) for at least 6 min. Minimal agitation Push +1 development:80°F (27°C) for at least 6 min. Minimal agitation 85°F (30°C) for at least 4 min. Intermittent agitation 90°F (32°C) for at least 3 min. Constant agitation Pull -1 development:70°F (21°C) for at least 4 min. Constant agitation65°F (18°C) for at least 6 min. Intermittent agitation. Can process 16+ rolls of film. Simply recombine used chemistry and add +15sec. for each roll previously processed until you reach 8 min. If a film does not appear fully cleared, process for longer in Df96. It will not affect development. | ||||||||
| Kentmere 100 | D-76 | stock | 50 | 7 | 7 | 20C | ||
| Kentmere 100 | D-76 | 1+1 | 50 | 8.5 | 8.5 | 20C | ||
| Kentmere 100 | D-76 | 1+3 | 50 | 17.5 | 17.5 | 20C | ||
| Kentmere 100 | D-76 | stock | 100 | 9 | 9 | 20C | ||
| Kentmere 100 | D-76 | 1+1 | 100 | 11.5 | 11.5 | 20C | ||
| Kentmere 100 | D-76 | 1+3 | 100 | 21 | 21 | 20C | ||
| Kentmere 100 | D-76 | stock | 200 | 11 | 11 | 20C | ||
| Kentmere 100 | D-76 | 1+1 | 200 | 15.5 | 15.5 | 20C | ||
| Kentmere 100 | D-76 | 1+1 | 400 | 20 | 20 | 20C | ||
| Kentmere 100 | D-76 | 1+1 | 800 | 27 | 20C | |||
| * User Notes * Agitate every minute or 60 sec | ||||||||
| Kentmere 100 | D-8 | 2+1 | 400 | 4 | 4 | 20C | ||
| Kentmere 100 | Eco Pro | stock | 50 | 6.5 | 6.5 | 20C | ||
| Kentmere 100 | Eco Pro | 1+1 | 50 | 8.5 | 8.5 | 20C | ||
| Kentmere 100 | Eco Pro | stock | 100 | 8 | 8 | 20C | ||
| Kentmere 100 | Eco Pro | 1+1 | 100 | 10 | 10 | 20C | ||
| Kentmere 100 | Eco Pro | stock | 200 | 9.5 | 9.5 | 20C | ||
| Kentmere 100 | FA-1027 | 1+14 | 100 | 10 | 20C | |||
| * User Notes * 8:30 on Jobo Silverbase | ||||||||
| Kentmere 100 | FD10 | 1+9 | 100 | 9.25 | 9.25 | 20C | ||
| Kentmere 100 | Fomadon LQN | 1+10 | 100 | 8-9 | 8-9 | 20C | ||
| Kentmere 100 | Fomadon P | 1+1 | 100 | 13.5 | 13.5 | 20C | ||
| Kentmere 100 | FX-39 | 1+9 | 100 | 6.5 | 6.5 | 20C | ||
| Kentmere 100 | FX-55 | 1+9 | 100 | 10 | 10 | 20C | ||
| Kentmere 100 | HC-110 | B | 100 | 6.5 | 6.5 | 20C | ||
| Kentmere 100 | HC-110 | B | 100 | 6.5 | 20C | |||
| * User Notes * The only time currently given in MDC is for 22C, a factor that might be missed by many (it was for a year or so by me!). This time is taken from Harman's film processing sheet for K100 at 20C in IlfoTec HC, and works well. | ||||||||
| Kentmere 100 | HC-110 | B | 100 | 5.75 | 5.75 | 22C | [a10][hcB] | |
| Kentmere 100 | HC-110 | H | 100 | 16 | 16 | 20C | [hcH][a05] | |
| Kentmere 100 | HC-110 | B | 200 | 8 | 8 | 20C | [hcB] | |
| Kentmere 100 | HC-110 | B | 400 | 10 | 10 | 20C | [hcB] | |
| Kentmere 100 | HC-110 | H | 400 | 20 | 20 | 20C | [hcH] | |
| Kentmere 100 | HC-110 | A | 800 | 15 | 15 | 20C | [hcA] | |
| Kentmere 100 | ID-11 | stock | 50 | 7 | 7 | 20C | ||
| Kentmere 100 | ID-11 | 1+1 | 50 | 8.5 | 8.5 | 20C | ||
| Kentmere 100 | ID-11 | 1+3 | 50 | 17.5 | 17.5 | 20C | ||
| Kentmere 100 | ID-11 | stock | 100 | 9 | 9 | 20C | ||
| Kentmere 100 | ID-11 | 1+1 | 100 | 11.5 | 11.5 | 20C | ||
| Kentmere 100 | ID-11 | 1+3 | 100 | 21 | 21 | 20C | ||
| Kentmere 100 | ID-11 | stock | 200 | 11 | 11 | 20C | ||
| Kentmere 100 | ID-11 | 1+1 | 200 | 15.5 | 15.5 | 20C | ||
| Kentmere 100 | ID-11 | 1+1 | 400 | 20 | 20 | 20C | ||
| Kentmere 100 | Ilfosol 3 | 1+9 | 100 | 5 | 5 | 20C | ||
| Kentmere 100 | Ilfosol 3 | 1+14 | 100 | 7.5 | 7.5 | 20C | ||
| Kentmere 100 | Ilfosol 3 | 1+14 | 100 | 8 | 20C | |||
| * User Notes * Pre wet for 2~3 minutes @ 20°C. Development - gentle inversions with 1/4 turns for first 30 seconds, then 2 gentle inversions every minute thereafter. Stop bath and fix as recommended by manufacturer. Compared to manufacturers recommended times, this will give slightly higher density and mid-tone contrast. Paterson super system 4 'universal' tank used. | ||||||||
| Kentmere 100 | Ilfotec DD | 1+4 | 50 | 7.5 | 7.5 | 24C | ||
| Kentmere 100 | Ilfotec DD | 1+4 | 100 | 9 | 9 | 24C | ||
| Kentmere 100 | Ilfotec DD | 1+4 | 200 | 12 | 12 | 24C | ||
| Kentmere 100 | Ilfotec DD-X | 1+4 | 50 | 8.5 | 8.5 | 20C | ||
| Kentmere 100 | Ilfotec DD-X | 1+4 | 100 | 10.5 | 10.5 | 20C | ||
| Kentmere 100 | Ilfotec DD-X | 1+4 | 200 | 12.5 | 12.5 | 20C | ||
| Kentmere 100 | Ilfotec HC | 1+31 | 50 | 5 | 5 | 20C | ||
| Kentmere 100 | Ilfotec HC | 1+15 | 100 | 4 | 4 | 20C | ||
| Kentmere 100 | Ilfotec HC | 1+31 | 100 | 6.5 | 6.5 | 20C | ||
| Kentmere 100 | Ilfotec HC | 1+15 | 200 | 5 | 5 | 20C | ||
| Kentmere 100 | Ilfotec HC | 1+31 | 200 | 8 | 8 | 20C | ||
| Kentmere 100 | Ilfotec HC | 1+31 | 400 | 14.5 | 14.5 | 20C | ||
| Kentmere 100 | Ilfotec LC29 | 1+19 | 50 | 5.5 | 5.5 | 20C | ||
| Kentmere 100 | Ilfotec LC29 | 1+29 | 50 | 7.5 | 7.5 | 20C | ||
| Kentmere 100 | Ilfotec LC29 | 1+9 | 100 | 4 | 4 | 20C | ||
| Kentmere 100 | Ilfotec LC29 | 1+19 | 100 | 7 | 7 | 20C | ||
| Kentmere 100 | Ilfotec LC29 | 1+29 | 100 | 11 | 11 | 20C | ||
| Kentmere 100 | Ilfotec LC29 | 1+9 | 200 | 5 | 5 | 20C | ||
| Kentmere 100 | Ilfotec LC29 | 1+19 | 200 | 8 | 8 | 20C | ||
| Kentmere 100 | JOBO Alpha | 1+1+18 | 100 | 8 | 22C | |||
| * User Notes * Time and temperature for rotary processing, minimal developer quantity per film is 6ml of part A and of part B (so 6+6+90); per JOBO chart : for inversion processing (instead of rotational development): x1.1for 20°C (instead of 22°C): x1.2; for 24°C (instead of 22°C): x0.83 | ||||||||
| Kentmere 100 | Microphen | stock | 100 | 8.5 | 8.5 | 20C | ||
| Kentmere 100 | Microphen | 1+1 | 100 | 10.5 | 10.5 | 20C | ||
| Kentmere 100 | Microphen | 1+3 | 100 | 14.5 | 14.5 | 20C | ||
| Kentmere 100 | Microphen | stock | 200 | 9 | 9 | 20C | ||
| Kentmere 100 | Microphen | 1+1 | 200 | 14 | 14 | 20C | ||
| Kentmere 100 | Neofin Blue | 1+5 | 100 | 12 | 12 | 20C | ||
| Kentmere 100 | Neofin Blue | 1+9 | 100 | 15 | 15 | 20C | [a09] | |
| Kentmere 100 | Nucleol BF200 | 20+15+965 | 100 | 7 | 7 | 20C | ||
| Kentmere 100 | Nucleol BF200 | 2+1+100 | 125 | 7 | 7 | 20C | ||
| Kentmere 100 | Nucleol BF200 | 2+1+100 | 125 | 7 | 20C | |||
| Kentmere 100 | Paranol S | 1+25 | 100 | 11 | 11 | 20C | ||
| Kentmere 100 | Paranol S | 1+50 | 100 | 27 | 27 | 20C | ||
| Kentmere 100 | Parvofin | stock | 100 | 5.5 | 5.5 | 20C | ||
| Kentmere 100 | PC-TEA | 1+100 | 100 | 50 | 50 | 20C | ||
| * User Notes * Stand development: agitate for first minute only, then allow to stand undisturbed | ||||||||
| Kentmere 100 | Perceptol | stock | 50 | 9.5 | 9.5 | 20C | ||
| Kentmere 100 | Perceptol | 1+1 | 50 | 13.5 | 13.5 | 20C | ||
| Kentmere 100 | Perceptol | stock | 100 | 12.5 | 12.5 | 20C | ||
| Kentmere 100 | Perceptol | 1+1 | 100 | 15.5 | 15.5 | 20C | ||
| Kentmere 100 | PQ Universal | 1+19 | 100 | 5 | 5 | 20C | ||
| Kentmere 100 | Rodinal | 1+50 | 50 | 9 | 9 | 20C | ||
| Kentmere 100 | Rodinal | 1+25 | 100 | 9 | 9 | 20C | ||
| Kentmere 100 | Rodinal | 1+25 | 100 | 9 | 20C | |||
| Kentmere 100 | Rodinal | 1+50 | 100 | 15 | 15 | 20C | ||
| Kentmere 100 | Rodinal | 1+50 | 100 | 12.5 | 20C | |||
| * User Notes * Agitation first 30 seconds, then every minute 4 times. 15 minutes, as indicated, seems me rahter long | ||||||||
| Kentmere 100 | Rodinal | 1+50 | 100 | 15 | 20C | |||
| * User Notes * Was grainy/overexposed at 15 mins with 7-8 inversions in 10 seconds every minute | ||||||||
| Kentmere 100 | Rodinal | 1+25 | 200 | 13 | 20C | |||
| * User Notes * Agitation: continuous first 30 seconds, then 10 seconds every 1 minute. | ||||||||
| Kentmere 100 | Rodinal | 1+50 | 200 | 20 | 20 | 20C | [a04] | |
| Kentmere 100 | Rodinal | 1+50 | 400 | 25 | 20C | |||
| * User Notes * Continuous agitation for first 30s, then 3 agitations each 30s. | ||||||||
| Kentmere 100 | Rodinal | 1+50 | 400 | # | 20C | |||
| * User Notes * 44 mins total with 1 inversion every 4 mins. | ||||||||
| Kentmere 100 | Rodinal | 1+50 | 400 | 15 | 20C | |||
| * User Notes * 15 minutes seems to be too long; I get better results with 12 minutes. | ||||||||
| Kentmere 100 | Rodinal | 1+25 | 800 | 40* | 20C | |||
| * User Notes * Agitated first minute, then one minute every 10 minutes. | ||||||||
| Kentmere 100 | Rodinal | 1+50 | 800 | 60 | 20C | |||
| * User Notes * Semi-stand development.Agitate for the first 30-60 seconds. Then agitate (or do 4-5 inversions) every five minutes until done. | ||||||||
| Kentmere 100 | Rodinal | 1+50 | 800 | 60 | 20C | |||
| * User Notes * Gentle agitation every 10 minutes and give 10 extra time in the tank | ||||||||
| Kentmere 100 | Rodinal | 1+100 | 800 | 120 | 120 | 20C | [52] | |
| Kentmere 100 | Rollei Supergrain | 1+9 | 100 | 6 | 6 | 20C | ||
| Kentmere 100 | Rollei Supergrain | 1+15 | 100 | 7.5 | 7.5 | 20C | ||
| Kentmere 100 | Silberra Ascorol | 1+29 | 100 | 9 | 9 | 20C | ||
| Kentmere 100 | Sprint Standard | 1+9 | 100 | 8.5 | 8.5 | 20C | ||
| Kentmere 100 | Spur HRX | 1+20 | 80 | 9.5 | 9.5 | 20C | ||
| Kentmere 100 | Spur SLD | 1+7 | 200 | 14 | 14 | 24C | [a04] | |
| Kentmere 100 | Spur SLD | 1+24 | 200 | 8.5 | 8.5 | 20C | [a04] | |
| Kentmere 100 | Spur Speed-Major | 1+35 | 200 | 8.5 | 8.5 | 20C | [a04] | |
| Kentmere 100 | Spur Speed-Major | 1+24 | 400 | 11 | 11 | 20C | [a04] | |
| Kentmere 100 | Spur Speed-Major | 1+14 | 640 | 12 | 12 | 20C | [a04] | |
| Kentmere 100 | Spur Speed-Major | 1+9 | 1000 | 13 | 13 | 20C | ||
| Kentmere 100 | Spur TRX 2000 | 1+35 | 160 | 10 | 10 | 20C | [a04] | |
| Kentmere 100 | Spur UFP | 1+30 | 80 | 8 | 8 | 20C | ||
| Kentmere 100 | Studional | 1+30 | 100 | 9 | 9 | 20C | ||
| Kentmere 100 | TMax Dev | 1+4 | 100 | 8 | 8 | 20C | ||
| Kentmere 100 | Uncle Mort's | 1+9 | 100 | 6 | 6 | 20C | ||
| Kentmere 100 | XT-3 | stock | 50 | 6.5 | 6.5 | 20C | ||
| Kentmere 100 | XT-3 | 1+1 | 50 | 8.5 | 8.5 | 20C | ||
| Kentmere 100 | XT-3 | stock | 100 | 8 | 8 | 20C | ||
| Kentmere 100 | XT-3 | 1+1 | 100 | 10 | 10 | 20C | ||
| Kentmere 100 | Xtol | stock | 50 | 6.5 | 6.5 | 20C | ||
| Kentmere 100 | Xtol | 1+1 | 50 | 8.5 | 8.5 | 20C | ||
| Kentmere 100 | Xtol | stock | 100 | 8 | 8 | 20C | ||
| Kentmere 100 | Xtol | 1+1 | 100 | 10 | 10 | 20C | ||
| Kentmere 100 | Xtol | stock | 200 | 9.5 | 9.5 | 20C | ||
| Kentmere 100 | Xtol | 1+2 | 200 | 18.5 | 18.5 | 20C | ||
| Kentmere 100 | Xtol | 1+1 | 400 | 14.5 | 14.5 | 20C | ||
| Kentmere 100 | Xtol | 1+1 | 400 | 11.5 | 24C | |||
The Massive Dev Chart
https://www.digitaltruth.com
© Digitaltruth Photo Ltd, All Rights Reserved.