Page 1 of 1
Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Posted: Tue Jul 16, 2013 2:24 pm
by Phototox
Does anyone have any experience with this combination? Times, agitation, etc...
If anyone can give me an idea of what to expect with this combination.
Thanx
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Posted: Wed Jul 17, 2013 8:28 am
by Ornello
Whatever times you come up with, cut them by 30% or increase dilution by 50%. Most development times you will find around are excessive.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Posted: Wed Jul 17, 2013 3:11 pm
by Phototox
The problem is that i don't have any time to begin with. I couldn't find any recommendations for this combination.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Posted: Fri Jul 19, 2013 9:05 am
by Ornello
Phototox wrote:The problem is that i don't have any time to begin with. I couldn't find any recommendations for this combination.
They are on the Tetenal site. But I urge you to cut them back substantially:
http://www.tetenal.com/index_c.htm?AKT= ... 00000&L=UK
Try 1+9 for 5 minutes to start.
But in any event I would not bother with Pan-F. Fujifilm Acros is about a stop faster and just as fine-grained.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Posted: Sun Jul 21, 2013 12:16 pm
by Phototox
It's not Pan-F, it is Pan 400
http://www.photopoint.ee/images/product ... -21825.//jpg// , and there is nothing about it on Ilford or Tetenal website.
Re: Need help, Ilford Pan 400 in Tetenal Ultrafin Plus
Posted: Sun Jul 21, 2013 7:38 pm
by Ornello
Then start with times for HP5 and go from there. This is elementary. Trial and error.