increasing sharpness with Classic Pan 400

Film Photography & Darkroom discussion

Moderator: Keith Tapscott.

kludge
Posts: 2
Joined: Mon Oct 17, 2005 4:03 pm

increasing sharpness with Classic Pan 400

Postby kludge » Mon Oct 17, 2005 4:13 pm

I just shot my first roll of J&C Classic Pan 400. I really like the tonality, but I'm not so pleased with the sharpness. It seems a little fuzzy at the edges compared to the TMAX400 and HP5 I'd been using. I'm just starting with my own development, so I'm not very sophisticated about these things.

I shot it at rated speed, and developed in HC110 solution B, 9 minutes, 75f, agitation 1/min. Highlights and shadows both came out well, so I think the development time was about right. But the fuzzy edges! What can I do about that? A different developer, maybe? Or a different process with the HC110?


tornredcarpet
Posts: 21
Joined: Thu Sep 15, 2005 1:46 pm

Postby tornredcarpet » Tue Oct 18, 2005 4:44 am

Try XTOL... it's a bit sharper.

BTW, tell us your development/agitation procedures.

kludge
Posts: 2
Joined: Mon Oct 17, 2005 4:03 pm

Postby kludge » Tue Oct 18, 2005 11:26 am

I thought about XTOL, but I have to make too much at once - storage problem. I'd prefer something I can mix as a one-shot.

My agitation procedure is usually 30 seconds continuous, followed by 4 inversions once a minute.

I used solution B for this particular film, but I've been using solution H (1:63) @ 72F with good sharpness on TMAX400, and on HP5 pushed to 640. I really like the tonal range and shadow detail this approach provides. However, I think the sharpness is a function of the film, not the developer - those films are even sharper in solution B.

jdef
Posts: 4
Joined: Wed Sep 28, 2005 4:15 pm

Sharp Forte 400

Postby jdef » Tue Oct 18, 2005 3:56 pm

I use a lot of Forte 400, and have not found it to be unsharp compared to HP5+. Maybe there was some anomoly in your process that reduced sharpness. There are sharper developers than HC110, that share its handling characteristics and longevity. Try 510-Pyro:

http://www.digitaltruth.com/techdata/ar ... ingdev.php


Jay

Lowell Huff
Posts: 129
Joined: Thu Aug 19, 2004 6:09 pm
Location: Los Angeles, CA 90061
Contact:

Postby Lowell Huff » Wed Oct 19, 2005 10:28 am

Our F76plus DEVELOPER, available at this sight, will provide great results with this and most other films. As a liquid, you can use as a "one shot", or machine process developer. You might also fall in "love" with our ODORLESS FIXER and STOP BATH.


Who is online

Users browsing this forum: No registered users and 4 guests