1) What is the amount of D-76 1:1 required for processing one sheet of 4X5 film? Or, how many sheets can be processed in, say, one litre of 1:1. I am not finding this answer easily on Kodak's pro web site.
2) I believe you can process more than 12 sheets in the amount of D-76 1:1 it takes to fill a 12-sheet tank. If that is the case, can the same batch of D-76 1:1 working solution be used to process more than one batch of film? In other words, if I make enough D-76 1:1 to process 32 sheets of film, can I process that film in 3 batches of twelve sheets per batch, immersing each subsequent batch after the first into the same solution?
3) Is D-76 1:1 a good way to go when processing sheet film?
Sheet film processing: Can D-76 1:1 be reused?
Moderator: Keith Tapscott.
Re: Sheet film processing: Can D-76 1:1 be reused?
Kodak does not recommend re-using D76 1:1. I concur. You can write to Kodak for the answers to your other questions.kcf wrote:1) What is the amount of D-76 1:1 required for processing one sheet of 4X5 film? Or, how many sheets can be processed in, say, one litre of 1:1. I am not finding this answer easily on Kodak's pro web site.
2) I believe you can process more than 12 sheets in the amount of D-76 1:1 it takes to fill a 12-sheet tank. If that is the case, can the same batch of D-76 1:1 working solution be used to process more than one batch of film? In other words, if I make enough D-76 1:1 to process 32 sheets of film, can I process that film in 3 batches of twelve sheets per batch, immersing each subsequent batch after the first into the same solution?
3) Is D-76 1:1 a good way to go when processing sheet film?
-
- Posts: 551
- Joined: Tue Jan 17, 2006 8:58 am
- Location: Plymouth, England.
You can download a PDF document for D76 here with the technical data that you require.
http://www.kodak.com/global/en/professi ... 4.14&lc=en
http://www.kodak.com/global/en/professi ... 4.14&lc=en
Thank you both.
I noticed Kodak said not to re-use developer, Ornello, but I had noticed long ago that you could process something like 32 sheets of 4x5 in the amount of developer it takes to fill a 12-sheet tank.
Using a hanger tank would seem to be an expensive way to process sheet film compared to tray development, if you need to dump a whole hanger tank every time you develop twelve sheets. You'd be able to use a more appropriate amount of developer to the number of sheets you're developing if you use a tray, since a tank has to be filled to be used.
I noticed Kodak said not to re-use developer, Ornello, but I had noticed long ago that you could process something like 32 sheets of 4x5 in the amount of developer it takes to fill a 12-sheet tank.
Using a hanger tank would seem to be an expensive way to process sheet film compared to tray development, if you need to dump a whole hanger tank every time you develop twelve sheets. You'd be able to use a more appropriate amount of developer to the number of sheets you're developing if you use a tray, since a tank has to be filled to be used.
OK, figured it out. Disregard last post. Lost in space last night when I read the Kodak page.
Just for the record, you need 2 liters to fill a twelve sheet tank. Kodak's numbers indicate you can do two 8x10's per liter of 1:1. That's eight 4x5's per liter of 1:1 since four 4x5's equals an 8x10.
So you're having to make an extra half liter of 1:1 to use a tank, since you need only a liter and a half to process the twelve sheets the tank will hold.
Just for the record, you need 2 liters to fill a twelve sheet tank. Kodak's numbers indicate you can do two 8x10's per liter of 1:1. That's eight 4x5's per liter of 1:1 since four 4x5's equals an 8x10.
So you're having to make an extra half liter of 1:1 to use a tank, since you need only a liter and a half to process the twelve sheets the tank will hold.
-
- Posts: 551
- Joined: Tue Jan 17, 2006 8:58 am
- Location: Plymouth, England.
The 1:1 dilution should be discarded after one use only. Also, only dilute from the stock solution just before use, as it only has a recommended keeping time of 24 hours when diluted.kcf wrote:OK, figured it out. Disregard last post. Lost in space last night when I read the Kodak page.
Just for the record, you need 2 liters to fill a twelve sheet tank. Kodak's numbers indicate you can do two 8x10's per liter of 1:1. That's eight 4x5's per liter of 1:1 since four 4x5's equals an 8x10.
So you're having to make an extra half liter of 1:1 to use a tank, since you need only a liter and a half to process the twelve sheets the tank will hold.
The stock solution can be reused, but works best when the dedicated D-76R replenisher is added. When replenished, D-76 has a very long life provided that it is used regularly and again, all that you need to know about replenishment is in the technical data publication.