pull processing, Delta 3200 Ilford

Film Photography & Darkroom discussion

Moderator: Keith Tapscott.

Post Reply
Posts: 1
Joined: Sat Aug 28, 2010 4:17 pm

pull processing, Delta 3200 Ilford

Post by juantontomatoe » Sat Aug 28, 2010 4:21 pm

I just shot two rolls of Ilford 3200 film at 400 ASA. I was
wondering if you could assist me in finding the pull process time for
optimum results using Rodinal at 1:24 dilution? I understand that I
will not get good results, but I would like to salvage what I can. I
am also aware of post development reducing with Farmers as an adjunct.
Thanks for your time, Juan

Keith Tapscott.
Posts: 518
Joined: Tue Jan 17, 2006 8:58 am
Location: Plymouth, England.

Re: pull processing, Delta 3200 Ilford

Post by Keith Tapscott. » Sun Aug 29, 2010 6:11 am

According to Ilford's technical information for Delta 3200, use Rodinal diluted 1+25 for 5.5 minutes at 20*C. You might get more satisfactory negatives from undiluted Perceptol though at that exposure rating.

Posts: 865
Joined: Thu Jan 19, 2006 9:49 am

Re: pull processing, Delta 3200 Ilford

Post by Ornello » Mon Aug 30, 2010 10:59 am

The true speed of this material is only about 1000, so I would simply process in Perceptol...at the time suggested for ISO 500 or so...

Post Reply