Maco Cube 400c in Tetenal Ultrafin Plus?

Film Photography & Darkroom discussion

Moderator: Keith Tapscott.

Post Reply
Adrian
Posts: 2
Joined: Wed Sep 21, 2005 11:46 pm
Location: Poland

Maco Cube 400c in Tetenal Ultrafin Plus?

Post by Adrian »

Those anybody knows developing time for Maco CUBE 400c and Ilford Pan 400 in Tetenal Ultrafin Plus :?:

Fotohuis
Posts: 141
Joined: Fri Sep 16, 2005 12:25 pm
Location: the Netherlands
Contact:

Post by Fotohuis »

I can say something about the Cube 400C. It's a rather simmular emulsion as the Rollei R3, only not on clear polyester layer and it's missing the N.C. layer so this film curls strongly.

Best developer for these type of films (depth developers you need) are around iso 400; AM74 or LPsupergrain or Rollei H.S. (all the same under different brand) or the CG512 or CubeXS or Rollei L.S. for E.I. under iso 200.

Regards,

Robert
"De enige beperking in je fotografie ben je zelf"

http://www.FotohuisRoVo.nl
http://gallery.fotohuisrovo.nl/

Adrian
Posts: 2
Joined: Wed Sep 21, 2005 11:46 pm
Location: Poland

Post by Adrian »

Thank you for your comment. Probably, I will do some tests with Ultrafin Plus and different roll of Cube 400c anyway, and check how it will work.
If the results will be not satisfactory, I will need to buy one of developers which you recommended.

Best regards,
Adrian

Post Reply