|Apps Home||FAQs||User Guide||Support Forum|
f-Stop Printing Calculator
for iPhone, iPod Touch, iPad & Android
The f-Stop Printing Calculator App allows darkroom printers to modify times by stops when calculating exposure values.
- Base time up to 999.9 seconds
- Calculates in 1/10ths of a second
- Times and Adjustments displayed
- +/- 1/4, 1/2, 3/4 stops
- Red light mode
The functions and algorithm used in the f-Stop Printing Calculator were designed by Bruce Tanner.
For more information about Bruce's work, teaching and creation of the calculator please visit: http://brucetanner.com/. An online version of this app can be found at http://www.brucetanner.com/f-stop_printing/calculator.html or visit Bruce's blog at http://brucetannerphotographer.wordpress.com/f-stop-printing/.
F-stop printing was originally made popular by the award winning printer Gene Nocon in 1987. If you want the full explanation, you can find it in his book Photographic Printing (now out of print). Put fundamentally, F-stop printing is the conclusion to all the other methods of exposure control you have made in getting towards your negative, because an F-stop is a unit of Exposure.
Using the F-Stop Printing Calculator
The F-Stop Printing Calculator assumes you need to establish 1/4 stop increments (+ or – up to 3/4) of the base time you have entered and, either generate a new time, or an increment of an F-stop if you are burning in, or making a more precise test strip. The basic way to work would be to generate a test strip with intervals one F-stop apart (say 4, 8, 16, 32 seconds). If you think a correct exposure is half way between two that you have, enter the lower time in the F-Stop Printing Calculator, click GO! and the calculator will tell you the new time to use. So, if 8 seconds were too light, and 16 seconds too dark, the half way point is 11.3 seconds. You have the option of using 1/4 stops if you think it is not exactly halfway. If you are not sure why this works better than a straightforward linear time increase read on.
Background to F-Stop Printing
When you make an exposure in your camera, if you make a change from F8 to F5. 6, you are letting more light in by increasing the aperture by 1 F-stop. You are doubling the amount of light reaching the film. If you changed your shutter speed from 1/ 125 to 1/ 60, you are also doubling the amount of light reaching the film, by 1 F-stop, although you are using time to achieve this. If you load a 400 ISO film instead of a 200 ISO film, you are increasing the sensitivity of the film by doubling it, or 1 F-stop, but this time using the sensitivity of the emulsion to achieve this.
The idea of F-stop printing is that you continue this process through to the exposure on your photographic paper. An initial test strip could end up being 4, 8, 16 and 32 seconds, with each step exactly one F-stop apart from the next (doubling or halving the overall exposure). A linear strip might be 5, 10, 15, 20, 25 seconds giving a test strip of equal time intervals, but diminishing exposure intervals with 5 steps giving a shorter overall range than the 4 step strip. The linear approach, rather than the F-stop approach (sometimes called logarithmic or geometric), does not give even results and makes judging and burning harder.
If the shorter F-stop strip gives two steps that are too far apart (one too light and one too dark), you will need to find the smaller 1/4 or 1/2 stop times using the F-Stop Printing Calculator.
F-stop timers use a logarithmic rather than a linear interval and, therefore, produce an easier to read test strip as the exposure differences are exactly equal.
When you get used to F-stop printing, it will deliver bonuses for you. The relationship within a print from its base time to a burn time remains constant regardless of the size of the paper. So if a burn is +3/4 stop on a 10 x 8 sheet, it will always be +3/4 stop on any size paper. Once you know that relationship, then when you do the same print at a different size, you just work out the base time and use the F-Stop Printing Calculator to work out the burn time. If your print has several burn times that are different, no problem, the relationship applies, you save loads of time in the darkroom and get consistent prints. Magic!
If you are using variable contrast paper, it is possible to work out the difference that a modification in grade (on a multigrade or colour head) will make in terms of exposure time using F-stops. That relationship will apply to that enlarger always. So, if you discover that changing from grade 2 to grade 3 requires a 1/4 stop time increase, it always will regardless of paper size.
The f-Stop Printing Calculator is a free app. Copyright © Digitaltruth Photo Ltd & Bruce Tanner.
Minimum system requirement: Apple iOS 6.0+ or Android 3.0+