 |
|
| Part A | ||
| Water | 300 | ml |
| Potassium Citrate | 100 | g |
| Water to make | 500 | ml |
| Part B | ||
| Water | 200 | ml |
| Copper Sulfate | 7.5 | g |
| Water to make | 250 | ml |
| Part C | ||
| Water | 200 | ml |
| Potassium Ferricyanide | 6.5 | g |
| Water to make | 250 | ml |
| Mixing Instructions: Add chemicals in specified sequence. |
| Dilution: Pour Part A into a tray, then add Part B,and finally add Part C. Stir thoroughly at each stage. |
| Usage: |
Notes Immerse prints into toning solution until desired effect is achieved. Wash. |
